We love to spend time with our kids so today I’m going to show you 4 easy woodworking projects to build with your kids. They are very simple to do and with your company, nobody gets hurt. Students, preschoolers, kids 7 or 12 years old and more can participate!
Not all shown tools can be used by every children, evaluate if your kid can participate or not in some parts of the project. Some kids listens and uses them carefully and others not, so please, be smart and be safe.
1 Hour or Less
Children's carpentry projects
Some kids would love to do this simple woodworking projects for kids, work with you and do their own toys, but some will find this part boring. If this is your case don’t be worried, later they will love to play with something you build for them and they will remember it like that, besides these woodwork plans are quick and easy for the preschooler's kids so they don’t get bored. And in the future, you can tell them about this experience, and who knows maybe in the future they are professional woodworkers.
Things to build with wood for kids
How to make a tic tac toe board out of wood
The first woodworking ideas for kids is a board game, it is very fun to use in the afternoon or on a picnic and it’s a cool woodwork project to do with kids, so we are going to teach you how to build it so you can play with your little one. To Make a DIY Tic-Tac-Toe Game you will need one piece of wood approximately 1.5″ x 6.5″ x 6.5″ (4cm x 17cm x 17cm) it can be walnut wood. Wooden dowel 3/4″ (2cm) in diameter you can paint them in different colors or use two different types of wood.
1- Saw the edges of the board
You can use a hand saw, table saw, or miter saw and cut in the sizes previously said
2- Mark the lines of the table game
And with a hand saw or this mini tablesaw table saw, cut the board lines at a depth of 1/8″ (0,3cm)
3- Mark and drill the holes for the peg
mark them at the middle of the square with the diameter of the dowel and drill. With a drill press, you can set the depth stop so all the holes have the same depth
4- Cut ten 2 ″ (5 cm) long wooden dowels.
Cut five of each color or wood so you have a replacement if you lose one
5- Smooth the edges and apply linseed oil or paint
Sand the wood and with a router round and smooth the edges. Apply linseed oil to the wood and you’ll have your table game finished
How to make a cool birdhouse step by step
Steps to build a birdhouse
1- Cut the wood with these bird box plans
2- Drill the entrance hole
Like it was told above drill the hole with a diameter of 1,5”
3- Assemble the sides and roof of the birdhouse
Before assembly, make 5 holes in the backside in a dice shape. Then glue and screws to attach the roof, front, and back of the birdhouse, start with the roof. This step will be easier with corner clamps that hold the wood pieces secure and firm while you are screwing and gluing.
4- Join the PVC Pipe or a coffee can
Drill a couple of holes of ¼” (0,5cm) for drainage, next insert one of these two between the two sides of the birdhouse, and below it insert the threaded rod. This will hold the PVC pipe and if you remove it you have access to clean out the inside of the house
5- Paint or add linseed oil to your birdhouse.
When you hang it, try to leave it in a place that doesn't swing wildly on a windy day because the birds will avoid it. Use the wire shorter or use a support.
DIY wooden toothbrush holder
This is very easy and involves your children in the job. You just need a piece of wood, then they draw something in it and with a table saw or a jigsaw cut the shape they draw. Depend on how old is your kid you can let him do it with supervisión
Now make the holes for the toothbrush, this part your kids can do it just make sure everything is clamped very well and drill the hole.
The next part is painting, a thing they love to do. Let them be creative and with this step, the work will be done.
How to make Cursive Wooden Letters Puzzle
This wood project it’s simple and easy for the kids too. On a thick wooden board draw in cursive your letters or words and with a jigsaw (or scroll saw) remove the inside of the letters and divide them from each other. Sand the letters and the template and attach in the backside a thin wooden plank. Paint them with the color that you want. In this case, I use black for the template and linseed oil for the letters, you can use any color.
Following the steps, you will have your Wooden Puzzle done ready for your kids to play
Did you like our easy woodwork for kids?
Leave us your email so we can send you more woodwork projects and dicounts in our products